The VisionAire 2-3 is a portable oxygen concentrator manufactured by VisionAire. It draws 290 watts, weighs 13.6 kg. The unit uses Pressure Swing Adsorption (PSA) technology, supports remote monitoring. This service manual provides detailed technical information for healthcare professionals and biomedical technicians who service or operate the VisionAire 2-3.
Manual Depth: 4/5 — Detailed — moderate procedures (14 unique types); requires special tools/test equipment; electronics/PCB servicing; sieve bed replacement described; portable/simple design
| Flow Rate | N/A |
|---|---|
| Purity | 90% +5.5/-3% |
| Power | 290 watts |
| Weight | 13.6 kg |
| Outlet Pressure | N/A |
| Alarms | as described in Section 2.3 of this manual.) |
| Maintenance | N/A |
Oxygen Concentrator Service Manual For VisionAire, VisionAire 2 & VisionAire 3 Models AirSep Corporation · 401 Creekside Drive · Buffalo, NY 14228-2085 USA Telephone: (716) 691-0202 · 24-Hour Fax: (716) 691-4141 · www.airsep.com MN138-1 Rev H 02/14 ____________________________________________________________________________________ Expedited Product Warranty Check service is always at your fingertips with AirSep: http://www.airsep.com/medical/equipmentproviders.html OR In the US or Canada, dial 866-873-9277 AirSep® is a registered trademark of AirSep Corporation. • VisionAire™ is a trademark of AirSep Corporation. ii MN138-1 Rev H 02/14 Table of Contents Section 1.0 Introduction Section 2.0 Operation Check and Oxygen Concentration Test Section 3.0 General Instructions Section 4.0 Main Comp…