The Nidek Nuvo 8 is a stationary oxygen concentrator manufactured by Nidek. It draws 500 watts, weighs 24.5 kg. The unit can operate on alternative power sources including solar and battery, supports remote monitoring. This service manual provides detailed technical information for healthcare professionals and biomedical technicians who service or operate the Nidek Nuvo 8.
Manual Depth: 5/5 — Comprehensive — moderate procedures (13 unique types); requires special tools/test equipment; electronics/PCB servicing; sieve bed replacement described; compressor overhaul described; portable/simple design
| Flow Rate | N/A |
|---|---|
| Purity | N/A |
| Power | 500 watts |
| Weight | 24.5 kg |
| Outlet Pressure | N/A |
| Alarms | battery, if equipped. (Refer to |
| Maintenance | with intervals based on |
Nidek Medical Products, Inc Nuvo 8 Oxygen Concentrator Service Manual Nidek Medical Products, Inc. 3949 Valley East Industrial Drive Birmingham, Alabama 35217 USA Telephone: (205) 856-7200 • 24-Hour Fax: (205) 856-0533 Table of Contents General Safety Instructions Section 1.0 Introduction Production and Use of Oxygen Use and Maintenance of the Device Standards and Regulations 1.1 1.2 1.3 Home Service Provider Responsibility Important Notice and Symbol Explanations Functional Specifications Section 2.0 Operational Check and Concentration Test 2.1 2.2 2.3 Description of Operation Operation Check Alarm System 2.3.1 Battery Test 2.3.2 Power Failure Alarm test Oxygen Concentration Test and Specification General Instructions Routine Maintenance by the Patient 3.2.1 Cleaning the Cabinet Air Filte…