The Nidek Mark 5 Nuvo (v1) is a stationary oxygen concentrator manufactured by Nidek. It draws 410 watts, weighs 24.5 kg. The unit can operate on alternative power sources including solar and battery, supports remote monitoring. This service manual provides detailed technical information for healthcare professionals and biomedical technicians who service or operate the Nidek Mark 5 Nuvo (v1).
Manual Depth: 5/5 — Comprehensive — moderate procedures (14 unique types); requires special tools/test equipment; electronics/PCB servicing; sieve bed replacement described; compressor overhaul described; portable/simple design
| Flow Rate | N/A |
|---|---|
| Purity | N/A |
| Power | 410 watts |
| Weight | 24.5 kg |
| Outlet Pressure | N/A |
| Alarms | battery. (Refer to Section |
| Maintenance | with intervals based on |
Nidek Medical Products, Inc® Mark5 Nuvo® [M5C5] Oxygen Concentrator Service Manual Nidek Medical Products, Inc. 3949 Valley East Industrial Drive Birmingham, Alabama 35217 USA Telephone: (205) 856-7200 • 24-Hour Fax: (205) 856-0533 Nidek Medical is a trademark of Nidek Medical Products, Inc. Mark5 Nuvo® and M5C5 are registered trademarks of Nidek Medical Products, Inc. Page 2 of 59 2010-2225 Rev - B Table of Contents General Safety Instructions Section 1.0 Introduction Production and Use of Oxygen Use and Maintenance of the Device Standards and Regulations 1.1 1.2 1.3 Home Service Provider Responsibility Important Notice and Symbol Explanations Functional Specifications Section 2.0 Operational Check and Concentration Test 2.1 2.2 2.3 Description of Operation Operation Check Alarm System 2.…